Table of Contents
Advertisement
Operating Instructions
Figure 4.1 illustrates a graphic representation of the maintenance levels:
PRINT
1=DETECTOR DATA
2=COMM SETTINGS
3=EXIT PRINTING
Print Screen #2
4.23.12 Time/Date
READ STATUS
1=REVISIONS
2=PRINT
3=TIME/DATE
Read Status Screen #5
4.23.13 Battery Charger
READ STATUS
CHARGER ENAB
4XTM SPV ENAB
REM SYNC ENAB
Read Status Screen #6
4.23.14 4XTM Supervision
Read Status Screen #6 indicates whether 4XTMF Supervision is enabled or disabled.
4.23.15 Remote Sync
Read Status Screen #6 indicates whether remote synchronization is enabled or disabled.
116
Maintenance
Urgent
Low Chamber
Reading
Figure 4.1 Diagram of Maintenance Levels
Pressing 2 while viewing Print Screen #2 allows the user to print the Communicator's settings. Refer to "Com-
municator" on page 79 for additional information on the display.
Pressing 3 while viewing Print Screen #2 exits the user from the print menu.
The operator can view the daylight savings time and the month and week when daylight savings time will
begin and end. Pressing 2 while viewing Read Status Screen #5 will display the following screens:
DAYLIGHT SAVINGS
ENABLED
START MONTH
START WEEK
Read Status Screen #6 indicates whether the onboard battery charger is enabled or disabled.
YES
NO
YES
DIRTY
Maintenance
Alert
Acceptable
Range
LOW
VALUE
YES
MAR
WEEK 2
ES-1000X Series Manual — P/N LS10133-000FL-E:A 6/21/2023
DAYLIGHT SAVINGS
END MONTH
NOV
END WEEK
WEEK 1
Read Status
Advertisement
Table of Contents
