Honeywell Fire-Lite Alarms ES-1000X Manual page 57

Master Programming Level
When the last digit is keyed-in, the following screen will be displayed:
Pressing 1 for Control Module, 2 for Wireless Relay Control Module, 3 for Monitor Module, or 4 for Wireless Monitor Module will cause
the following screen to be displayed:
The programmer can continue adding modules by pressing the ESC or left arrow key which will return the display to the Add Module Screen
#1.

Delete Module
MODULES
1=ADD
2=DELETE
3=EDIT
Modules Screen
A flashing cursor will appear in the position of the first asterisk to the left. Using the panel keypad, key in the module address such as 005.
When the last digit is keyed in, the following confirmation that the module has been deleted will be displayed:

Edit Module Screen for Monitor Module
The programmer can change a modules existing or factory default programming by pressing 3 in the Modules Screen. The following screen
will be displayed:
A flashing cursor will appear in the position of the first asterisk to the left. The programmer keys in the three digit module address, such as
012. When the last digit is keyed-in, if the selected address has not been added to programming, a screen showing information about a device
that is installed with a lower address, closest to the selected address, will be displayed. If no modules are installed on the loop, the following
screen will be displayed:
If the selected address has been added to programming but a module (such as a monitor module) with the selected address is not physically
installed on the SLC or has a communication fault, the following screen will be displayed:
ES-1000X Series Manual — P/N LS10133-000FL-E:A 6/21/2023
1=CON
2=CON:WL-
Add Module Screen #2
MODULE#
IS ADDED (WIRELESS)
Add Module Screen #3
Pressing 2 in the Modules Screen will display the Delete Module Screen which allows the programmer to
delete a specific module:
DELETE MODULE
ENTER MODULE#
Delete Module Screen
DELETE MODULE
MODULE#
IS DELETED
EDIT MODULE
ENTER MODULE ADDRESS
Edit Module Screen
Edit Module Screen
TROUBL MONITOR
ADD MODULE
3=MON
4=MON:WL
RELAY
ADD MODULE
005
005
NO MODULE
INSTALLED
<ADJ><NOUN>
ZNNN
1M012
Programming
57