Securing Fieldbus Wiring; Securing The Enclosure; Ensuring The Latest Firmware; Normal Operations - Honeywell Pro-Watch 7000 Security Manual

Caution: The PW7K panel is not recommended to connect to any

Securing Fieldbus Wiring

The PW7K support below types of field bus protocols over three wire and RS-485
physical cables.
Protocol
Wiegand
OSDP
SIO
Cables used for Wiegand and SIO communications must be concealed in the
secured area and must not be freely accessible.

Securing The Enclosure

Install the hardware in the secure enclosure with tamper protection to generate
notifications when the enclosure is opened/tampered. It is recommended to
mount SIO in the same enclosure as controller board.

Ensuring The Latest Firmware

Always make sure to check for the new releases of the PW7K & SIO Interface board
firmware and update panel to use latest version of the firmware. This ensures the
latest changes and security improvements are installed.

Normal Operations

Set all DIP switches to OFF for normal Operation.
2
untrusted network, Internet. The PW7K panel in is designed to
work in trusted or protected network where known users can
interact with the panel. If the panel is connected to the
INTERNET, remote attacker may try to exploit or damage the
panel.
Note: The user will own the risk, if the user connects the panel to
the Internet or any untrusted network
Medium
Three wire bus
RS-485
RS-485
PW7K Security Manual
Purpose
Reader communication
Reader communication
SIO Module communication
Preferred Cable
CAT 6E/FSTP
CAT 6E/FSTP
CAT6E/FSTP
@Honeywell Inc