Ann-Bus Options - Honeywell Fire-Lite Alarms ES-1000X Manual

Programming

ANN-BUS Options

ANN-BUS SELECT
1=PRIMARY
2=SECONDARY
3=ANN-BUS OPTIONS
Annunciator Screen

ANN-S/PG (Print) Options
XXX ANN-BUS
1=ANN-S/PG OPTIONS
2=ANN-LED OPTIONS
3=ANN-80/100 OPTIONS
ANN-BUS Options Screen
#1 will allow the programmer to select between a Parallel and Serial Port for printer connection. Each press of the 1 key will cause the dis-
play to toggle between Port PAR (parallel) and Port SER (serial). It is important to note that the interface selected determines which options
are available to the user.
If the Parallel Port option is selected, the user has the option to supervise the printer and select an offline timer for the supervision by press-
ing 2 for Printer Supervision while viewing Print Options screen #1. Each press of the 2 key will cause the display to toggle between Printer
Supv NO for no supervision and Printer Supv YES for printer supervision. Note that this option is not selectable if the Serial Port option has
been selected.
If the Parallel Port option is selected, the user has the ability to select an Offline Timer by pressing 3 while viewing Print Options screen #1.
The resultant screen allows the programmer to program the Offline Timer for a delay of between 0 and 255 seconds before loss of printer
supervision is reported as a trouble.
If the Serial Port option is selected, the Printer Supv and Offline Timer options will not be available. The Baud Rate, Data Bits, Parity and
Stop Bits options are only available when the Serial Port option has been selected.
Pressing 1 for Baud Rate while viewing ANN-S/PG Options screen #2 will cause a screen to appear which allow the user to select a Baud
Rate of 19200, 9600, or 2400.
Pressing 2 for Data Bits while viewing ANN-S/PG Options screen #2 will cause a screen to appear which allows the user to select 7 or 8
Data Bits.
Pressing 3 for Parity while viewing ANN-S/PG Options screen #2 will cause a screen to appear which allows the user to select between No
Parity, Even Parity, or Odd Parity.
Pressing 1 for Stop Bits while viewing ANN-S/PG Options screen #3 will cause a screen to appear which allows the user to select between
1.0 or 2.0 Stop Bits.

ANN-LED Options
XXX ANN-BUS
1=ANN-S/PG OPTIONS
2=ANN-LED OPTIONS
3=ANN-80/100 OPTIONS
ANN-BUS Options Screen
The Piezo Enable option allows the programmer to select whether the piezo sounder on any installed ANN-LED module will ever sound.
Pressing 1 while viewing the ANN-LED Options Screen causes the display to toggle between Piezo Enable Yes and Piezo Enable No.
The Lamp Test Enable (LMP TST ENABLE) option allows the programmer to select whether the Lamp Test button on any installed ANN-
LED annunciator will function normally or always be ignored. Pressing 2 while viewing the ANN-LED Options Screen causes the display to
toggle between Lmp Tst Enable Yes (Lamp Test button functions normally) and Lmp Tst Enable No (Lamp Test button never functions).
The Silence Button Enable (SIL BTN ENABLE) option allows the programmer to select whether the Silence button on any installed ANN-
LED annunciator will function normally or always be ignored. Pressing 3 while viewing the ANN-LED Options Screen causes the display to
toggle between Sil Btn Enable Yes (Silence button functions normally) and Sil Btn Enable No (Silence button never functions).
94
Three ANN-BUS modules have more programming options. Pressing 3 while viewing the Annunciators screen
will display the following.
1=ANN-S/PG OPTIONS
2=ANN-LED OPTIONS
3=ANN-80/100 OPTIONS
ANN-BUS Options Screen
The Print option allows the programmer to configure the optional printer. Pressing 1 while viewing the ANN-
BUS screen will display the following screens: Pressing 1 for Port while viewing ANN-S/PG Options screen
ANN-S/PG OPTIONS
1=PORT SER
2=PRINTER SUPV N/A
3=OFFLINE TIMER N/A
ANN-S/PG Options Screen #1
This option allows the programmer to configure the optional ANN-LED annunciator. Pressing 2 while viewing
the ANN-BUS screen will display the following screens.
ANN-LED OPTIONS
1=PIEZO ENABLE
2=LMP TST ENABLE YES
3=SIL BTN ENABLE
ANN-LED Options Screen
ANN-BUS
ANN-S/PG OPTIONS
1=BAUD RATE
2=DATA BITS
3=PARITY
ANN-S/PG Options Screen #2
YES
NO
ES-1000X Series Manual — P/N LS10133-000FL-E:A 6/21/2023
Master Programming Level
ANN-S/PG OPTIONS
9600 1=STOP BITS
7
EVEN
ANN-S/PG Options Screen #3
1.0