12: Time-Date; 13: Battery Charger; 14: 4Xtm Supervision; 15: Remote Sync - Honeywell Fire-Lite Alarms ES-200X Manual

Operating Instructions
Figure 4.1 illustrates a graphic representation of the maintenance levels:
PRINT
1=DETECTOR DATA
2=COMM SETTINGS
3=EXIT PRINTING
Print Screen #2
4.24.12 Time-Date
READ STATUS
1=FUTURE USE
2=PRINT
3=TIME/DATE
Read Status Screen #5
4.24.13 Battery Charger
READ STATUS
CHARGER ENAB
4XTM SPV ENAB
REM SYNC ENAB
Read Status Screen #6
4.24.14 4XTM Supervision
Read Status Screen #6 indicates whether 4XTMF Supervision is enabled or disabled.
4.24.15 Remote Sync
Read Status Screen #6 indicates whether remote synchronization is enabled or disabled.
120
Maintenance
Urgent
Low Chamber
Reading
Figure 4.1 Diagram of Maintenance Levels
Pressing 2 while viewing Print Screen #2 allows the user to print the Communicator's settings. Refer to
"Communicator" on page 81 for additional information on the display.
Pressing 3 while viewing Print Screen #2 exits the user from the print menu.
The operator can view the daylight savings time and the month and week when daylight savings time will
begin and end. Pressing 2 while viewing Read Status Screen #5 will display the following screens:
DAYLIGHT SAVINGS
ENABLED
START MONTH
START WEEK
Read Status Screen #6 indicates whether the onboard battery charger is enabled or disabled.
YES
NO
YES
DIRTY
Maintenance
Alert
Acceptable
Range
LOW
VALUE
YES
MAR
WEEK-2
ES-200X Series Manual — P/N LS10131-000FL-E:C 7/25/2018
DAYLIGHT SAVINGS
END MONTH NOV
END WEEK WEEK-1
Read Status