Breas VIVO 65 User Manual page 79

The Vivo 65 can be operated from:
• The Breas XPAC using the XPAC battery cable.
• a 12 V external DC source using the 12/24 V converter.
• a 24 V external DC source using the external battery cable.
See 9.2 Power Accessories, page 149 for part numbers and more information.
With an external DC source connected, the Vivo 65 will automatically switch over to the
external DC source if the AC power (Mains) cord is removed or if the AC power (Mains)
supply fails. The external DC voltage level is shown under "Others", "Device Information"
in the menu.
1 Connect the external DC cable to the
Vivo 65. Make sure that it is fitted correctly.
2 Connect the other end of the cable to the DC source.
The switchover to external DC can be tested by connecting the external DC source and
then disconnecting the AC power cord. The Vivo 65 will automatically switch to external
DC as power source. Switchover is indicated by power source LED and information
message on the screen.
Doc. 006150 M-1
How to Use the Vivo 65
User manual
77