Table of Contents
Advertisement
Integrating Total Connect Remote Services
The Tuxedo supports Remote Services for controlling Z-Wave devices and scenes remotely from an associated Total
Connect account.
LAN or Wi-Fi MUST be enabled for proper integration with Total Connect. Synchronizing is
required before the enabled devices will display in Total Connect.
Enabling Devices for Total Connect
After devices have been added to the Tuxedo, the next step is to add them to Total Connect.
1.
From the home screen press Setup > System, > CS Setup. Enter the Authorized code and press TC SERVER
INFO.
2.
Press TC Enable
3.
Select the device(s) that you want to enable/disable in Total Connect.
NOTE: Some devices may need to be enabled after a software upgrade.
4.
Press Save when done.
5.
After devices have been enabled for Total Connect, follow the Total Connect prompts to synchronize the data
with Tuxedo.
NOTES:
1.
On Total Connect, the maximum number of supported devices is 40 switches (including Water Valves), 3
thermostats, 4 door locks and 3 Garage Door Controllers.
2.
Tuxedo supports 232 devices (including the Tuxedo keypads) in the Z-Wave network.
Controlling Automation (Z-Wave) Devices Remotely
Use Total Connect to control Z-Wave devices: lamp modules (binary switch), dimmer modules (multilevel switch),
thermostats, door locks, garage door controllers, water valves, shades, etc., from a smart phone, iPad
or PC. If accessing on a smart device (Apple or Android) verify the correct App has been download and installed.
1.
Access the Total Connect account and navigate to the Automation section of the dashboard.
2.
Select a displayed device and click the desired action. Refer to the Total Connect Online Help Guide for further
details on controlling Z-Wave devices.
, the Z-Wave Device Management for Total Connect screen is displayed.
TUXEDO TOUCH WI-FI INSTALLATION & SETUP GUIDE
48
, Android
Tablet,
®
TM
Advertisement
Table of Contents
