Table of Contents
Advertisement
TUXEDO TOUCH WI-FI INSTALLATION & SETUP GUIDE
Power Mode Setup
Power Mode allows you to reduce power consumption in the event of a system trouble such as AC Loss or Panel Low
Battery.
Select Power Save Mode to enable; then choose Turn-off Network, or Override Display Settings.
Press Apply
to save settings.
AC Loss Notes
When Override Display Settings is selected, Display settings are overwritten and Tuxedo operates in low power mode:
• Brightness/Volume controls decrease to minimum levels.
• Return to Homepage After time resets to 30 seconds.
• Auto Slideshow After time reverts to Never.
• When AC power is restored, the original Display settings resume.
• The device will disable the Network if it is configured.
• AC loss changes are not supported in safe mode.
Multimedia
Picture & Slide Show Setup
Tuxedo can display personal photo(s) on the Home screen as wallpaper or in a slide show format. To set up a slide show
of pictures, do the following:
1. Insert your personal media (SD/SDHC) card (with stored picture files). Formats supported are .bmp, .png or .jpg files.
2. From the Home screen, press Multi-Media
images appears on the screen.
Slide Show Setup
1. To add an image to the slide show, select the image from the list and press Add Image
screen and a check mark appears next to the selected image name on the list.
2. Press Slide Delay arrow to select the time interval that you want to allow between each photo being viewed. Choose
from (5, 10, 15, or 20 seconds).
3. Press Transition arrow to select the type of viewing transition desired (Standard, Horizontal, Vertical or Fade Out).
4. After images have been added, press Play Image
To remove an image from the slide show, select the image, and press Deselect Image
5. To navigate to the Next Image press
New Wallpaper Setup
1. Use the slide bar to highlight the file (image) you want to be displayed on the keypad screen.
2. Press Set Wallpaper
Press TOP to move up one level in the directory.
Press OPEN to view larger images and/or open directories, select from the list of images.
Press CLEAR ALL to clear all pictures from the current slide show rotation.
NOTES
To exit the slide sho at any time and resume normal operation, press anywhere on the screen.
•
When an image is loading, no other Picture Setup function can be performed.
•
U L
> Picture
; to go back to a Previous Image press
; view your selection from the "Home" screen.
Multimedia functionality is supplementary on and has not been
evaluated for UL compliant applications.
. The first image is displayed and a list of stored
to begin the slide show.
27
; the image appears on the
.
.
Advertisement
Table of Contents
