Table of Contents
Advertisement
TUXEDO TOUCH WI-FI INSTALLATION & SETUP GUIDE
Email notifications allow you to set up email accounts and receive email notifications when one or more system events
occur.
Users (and/or the installer) can receive email notifications when one or more selected system events or conditions occur
NOTE: Email notification requires that the user has an active email address and note the disclaimer at the bottom of the
page. "Email notification is strictly for convenience use only. Avoid relying on this feature for life critical events. It is
not UL certified and may fail at any time without notice."
NOTES:
• Email notification requires that you have an active email address.
• An SMTP account needs to be assigned to establish the email server domain (i.e., the "from" address).
• Four programmable sets of events (labeled "Event 1 – Event 4").
• Each event 1-4 can send email notifications to up to four email addresses.
• Seven event types and corresponding conditions can trigger an email.
For each event 1-4, choose the conditions that will trigger notification:
User Email Setup
1. To set up an email notification, from the Home screen, press Setup
2. Select the User SMTP icon to set up the user's email server information (user domain/server, which provides the
"from" email address).
a. Select the email server name (email provider). Choose from GMAIL, OUTLOOK, YAHOO, or Add New E-mail
Server.
b. Enter the Email ID (Username) and Password for the chosen email server on the appropriate lines.
c. The Email Server and SMTP port number fields are automatically filled unless "Add new email server" was
selected.
If Add new E-Mail Server was selected, enter the email server SMTP and port number information (see your email
provider for details).
To change the "E-Mail Server Name," press Edit
Enter an "E-Mail ID" and password. Enter the "E-Mail Server" address and "SMTP Port Number." If required by the
e-mail service provider, click on the box next to USE SECURE CONNECTION (SSL).
d. Press Save.
3. Press Event 1 to define the desired event notifications to be sent (See "Defining Event Types" section below.) Select
the desired event types and conditions for this Event and press Save.
4. Enter the email address(es) to which Event 1 will send a notification; press Save when done. User notifications are
restricted to one SMTP (from) email address.
Repeat steps three & four for Events 2-4 if desired.
5. Press E-MAIL LOG to view the email log; press CLEAR LOG to remove the email log.
Dealer Notifications (Automation Mode Only)
If Dealer notifications are desired, press Dealer Setup
Code" then follow the steps above to program event notifications. Dealer notifications are restricted to one email
address. NOTE: Dealer Notifications are only accessible when keypad is configured in "Automation Mode."
Dealer Code
Press the Dealer Code icon and enter the New Code; Confirm New Code and press Save when done.
The dealer can choose to save the Dealer Email and Dealer SMTP to the SD Card by selecting Save conf to SD Card.
The dealer can use the SD Card with the saved configuration and apply to another keypad by selecting Load conf from
SD Card. Press Save when done.
U L
and enter a new server name.
to assign the "Dealer Email." "Dealer SMTP" and "Dealer
Email Notifications are supplementary only and not evaluated for
UL applications.
19
> Email
.
Advertisement
Table of Contents
