Table of Contents
Advertisement
TUXEDO TOUCH WI-FI INSTALLATION & SETUP GUIDE
Defining Scenes
The system can automatically activate various devices when certain events occur based on predefined Scenes.
Defines the event that triggers the programmed action(s).
Trigger
Triggers include the following categories:
Defines an optional event that puts a condition on the trigger. If a condition is set, the
Condition
condition must exist at the time of the trigger for the action to occur. Conditions include the
same categories as triggers. However, conditions cannot be set with the same category as the
trigger. (ex., if setting a trigger event for security, you cannot use security as a condition).
Defines the desired device action when the trigger event occurs. Actions include the following
Action
categories:
1.
Press Add Scene
2.
Press Scene Name; enter a name.
3.
Assign the desired Condition, Trigger, and Action for this Scene, See Scene Options section for detailed
information.
NOTES:
After each selection click Save!
•
Scenes cannot be triggered using panic zones 995, 996 and 999 on commercial panels and panic zones 95, 96
•
and 99 on residential panels.
A scene consists of a trigger, an optional condition, and up to five actions.
•
Example: You want the lights to turn on when you arrive home and disarm the system, but only at night.
Trigger: "when the system disarms" > Set the Trigger to Security: System Disarm.
•
Condition: "only at night" > Set the TIME condition (enter the Start Time and Duration)
•
Action: "Turn the lights ON" Set the Action to LIGHT: ON.
•
Time
Garage Door
Security
Garage Door
.
Security
Thermostat
Water Valve
Zones
Light
Thermostat
Water Valve
Recording
41
Door
Door
E-Mail
Advertisement
Table of Contents
