Table of Contents
Advertisement
Recording a Message
1. Press RECORD
and record your message while staying within approximately one foot of the keypad and speaking
at a normal voice volume. As you are recording your message, the remaining time counter counts down to indicate the
total remaining time available and a "Recording New Memo..." message is displayed above the message list window.
2. Press STOP
when you are done recording the message.
NOTE: Upon completion of the recording the Message LED will flash.
Listening to a New Message
To listen to a voice message:
1. Highlight the message and then press PLAY
is displayed above the message list window. The Message LED continues to flash until all new messages have been
played back entirely. When the end of the message is reached, the playback stops.
2. To listen to the next message or previous message, press NEXT
NOTE: The message LED will stop flashing when all messages have been heard.
Deleting Message(s)
To delete the selected message, press DELETE
To delete all messages, press DELETE ALL
To exit, press Back
Notes:
• Each message is numbered, dated and the length of the message in seconds (Sec) is displayed on the message list.
• Use the slide bar to raise and lower the message volume.
. As the message is being played, a "Play (#): Voice Memo..." message
. A confirmation window is displayed stating:
Selected Memo 2: 11/02/12 00:30:00
. A confirmation window is displayed stating:
Do you want to delete all messages?
> Home
.
TUXEDO TOUCH WI-FI INSTALLATION & SETUP GUIDE
and PREV
Del Selected
Select Yes or No.
"Confirmation"
Select Yes or No.
34
.
Advertisement
Table of Contents
