Creating Scenes - Honeywell Home Tuxedo Touch TUXWIFIS Installation And Setup Manual

Creating Scenes

The system can automatically activate devices when certain triggered events occur. When a programmed
trigger/condition occurs, the defined device(s) activates. The programming of these triggers and actions is called Scenes.
A scene consists of a trigger, an optional condition, and up to five actions. Up to 30 local (20 more using Total Connect
Remote Services) scenes can be defined. Scenes must have at least one trigger and one action to initiate. Remote scenes
are viewable from the keypad. However, they can only be viewed; editing is done through Total Connect.
The user can access scenes by pressing Automation
Column Description
Represents the scene number.
SI.No
Names assigned to the scene.
Name
Enabled or Disabled. This allows the option to enable or disable the scene for occasions
Status
the scene is not desired.
Gives you the option to run the scene manually to verify its functionality. Also used for
Manual
testing the scene on initial setup to confirm all actions are taking place.
Run
The other options are:
Name Description
Lists all of the scenes programmed locally in the keypad
Local
Lists all of the scenes programmed through Total Connect Remote Services. These scenes
Remote
cannot be edited, only viewed for their settings. The only option to edit is through Total
Connect.
Press to add a new scene.
Press to remove an existing scene.
Press to edit an existing scene.
TUXEDO TOUCH WI-FI INSTALLATION & SETUP GUIDE
> Scene Setup . The screen will display a table.
40