Table of Contents
Advertisement
CS Setup (Central Station)
Menu
Programming Locations (Press Setup
the Installer Code)
Configure the Tuxedo ECP and RIS address (see the "2: Set ECP Address/RIS
ECP
Automation Address" section).
Address
The configuration options are:
Options
The Code Authority screen displays User Names and Partition Authority Level for the User Code.
Code
To view the Code Authority level, do the following:
Authority
Press CS Setup
the user that you want to obtain Authority Level information about > BACK.
NOTE: If the User Code entered is not active in the system, an INVALID message will be displayed.
Tuxedo has the ability to record events in a history log. Each event is recorded with the time and
Device
date of its occurrence.
Events
Press Device Events
To view a record of events in a history log, slide the scroll bar down. The Date, Time and
Description of each event is displayed.
Time/Date Setup
If not already set from the control panel, set the current time and date using the Time/Date Setup menu access by
pressing Setup > System Setup
control panel when you press Apply and answer Yes. Additionally, when using the Tuxedo, the panel may download its
time into Tuxedo periodically after the clock is set (for Vista Plus series and newer commercial panels such as Vista
Turbo series).
Pressing Get Time downloads the time, date from the control panel, and exits the Set Time & Date screen.
NOTE: This
with VISTA Plus series controls and may not appear with all VISTA Turbo controls.
To set the current time, do the following:
1. Press Time/Date Setup
2. Press the Month "drop down," and select the current month.
3. Press the displayed Year / Hour / Minutes and enter the current year/hour/minute(s). Select AM or PM. (Each
depression toggles the AM/PM display).
4. Press the MMDDYY "drop down," and select a format for which you want the date to be displayed.
5. Select a 12-hour or 24-hour format for your time display by checking the box to the left of the 12 Hour display.
NOTE: Checked sets it for 12-hour format, unchecked sets it for 24-hours format.
6. Press DST
to enable daylight saving time in your system clock. Set the "Start DST" time and then the "End
DST" time by selecting the appropriate Month, Weekend and Hour that DST starts and ends.
7. Press Apply
, a confirmation screen appears. Yes, saves the time changes in your security system. No saves
the changes to the Tuxedo only.
Options
Description
Unchecking the box will eliminate the output
Lighting
control for the panel option, located under
"Automation." Leaving it checked enables the
option, see "Output Setup Function"
See the "Blank Display" feature under the
EN50131
"About the System" section for more information
Display
Unchecking the box disables the Weather
Weather
Forecast from the home page. For setup
Forecast
instruction, see the "Weather Forecast" section.
Only available in Automation Mode. See the "1:
Commercial
Operational Mode Setup"
Options are Normal Mode, Safe Mode, Demo
Operating
Mode, and Automation Mode. See the "1:
Modes
Operational Mode Setup."
> enter authorized code > Code Authority
and a list of events is displayed.
> Time/Date Setup
and enter your Authorized Code.
TUXEDO TOUCH WI-FI INSTALLATION & SETUP GUIDE
> System Setup
> CS Setup
. When the time is set it is stored in Tuxedo, it is sent to the
22
; enter
> Enter the 4-digit User Code for
Advertisement
Table of Contents
