Table of Contents
Advertisement
TUXEDO TOUCH WI-FI INSTALLATION & SETUP GUIDE
Setup Screen
Pressing SETUP
from the Home Page reveals the following options:
Brightness/Volume
Voice Setup
Partition
System Information
Disp & Audio
System
Account
System Information
The network information is an important tool. It allows you to verify the Software Version, MAC Address and CRC
(Used for Total Connect), IP Address, Broadcast Address, NetMask, and the option to enable the remote upgrade, setup
the remote upgrade feature (see "Software Upgrades" section) and syncing the IP to the server.
For Tuxedo to receive an update, it needs to be connected to the internet via LAN or
WIFI. An SD card with 200 MB of available space is required.
Software Upgrades
To view the current software version installed on your system, and verify connectivity, do the following:
Press Setup
> System Info
Address, and NetMask are displayed.
NOTE: AN SD CARD WITH 200 MB OF AVAILABLE SPACE IS REQUIRED.
Manual Software Upgrades
1. Go to the Toolkit site located at: www.tuxedotouchtoolkit.com to download the latest software to an SD card. An SD
card is provided with 4GB of available space.
2. Copy the software upgrade file to the SD card and power down the Tuxedo, or hit Reset on the side, under the SD card
slot.
3. Insert the SD card > power up the Tuxedo, or wait for the keypad to finish rebooting if Reset was pressed.
Automatically Pushed Updates
NOTE: For Tuxedo to receive an update, it needs to be connected to the internet via LAN or Wi-Fi and an SD card with a
minimum of 200MB installed.
Automatic Feature Updates
To receive feature updates for non-critical optional features, check the box labeled Enable Remote Upgrade on the
System Information screen.
changes to Available Software Update
NOTE: Setup
Optional Software Updates (From Server)
The "Status Bar" will display an
Available Software Update
LAN or WIFI.)
Name
Description
Move the Brightness/Volume slide bar up or down to increase or decrease settings.
Pressing back without saving will present a new window that displays YES saves
the change or NO to discard the changes. If Yes is selected when you exit the
keypad displays "Information Settings Saved."
Access the voice configuration screen. See Voice Tutorial above.
After setting the Brightness and Volume to the desired settings press Save.
Save
No function
Reveals Software Version, Network Information, Remote Upgrade options
Change the Operating Modes of the keypad (Backlight, Slideshow, etc.)
Access the IP Setup menu.
IP
Accesses the programming for advance system settings.
Account Log In Username and Passwords (See Web Server Access section for more
information).
For configuring email notifications
E-Mail
. The Interface Name, Host Name, MAC Address, CRC, IP Address, Broadcast
icon for downloading in progress, once complete the Setup
icon. (For the Tuxedo to receive an update, it needs to be connected to the internet via
. This represents a software download is in process.
13
icon changes to
Advertisement
Table of Contents
