Table of Contents
Advertisement
3: Resideo End User License Agreement (EULA)
The EULA displays and gives you the option to "Accept" or "Remind Me After 2 Hours." (NOTE: The Tuxedo requires an
acceptance acknowledgement. If not accepted by the third attempt, skipping EULA is no longer an option, only
"ACCEPT" is available) and the Wi-Fi Setup option appears. NOTE: The EULA can be reviewed by selecting Setup
System
> Advanced Setup
4: Network (LAN/Wi-Fi) Setup
Options are to "SKIP setup and remind in 2 hrs" or "SKIP Wi-Fi setup."
Enabling the Local Area Network (LAN) Option
By default, the keypad is configured for a LAN connection using a hardwired connection. This option requires the
configuration of the Internet Connection Type (DHCP or Static). If static is chosen, the IP Address, Subnet Mask,
Default Gateway, and DNS Server is manually programmed by the installer or network administrator.
The options are "Skip Setup Remind in 2 Hrs, Save, or Skip IP Setup."
Enabling the Wi-Fi Option
Press WIFI ON. A pop-up window displays: "This will switch off LAN Network, do you want to continue?" Yes or No.
Use the scroll bar to locate a network from the list of Wi-Fi Networks to connect to and highlight that field. Or, scroll to
the bottom of the list and select Add Network. Highlight each field to enter the required information for SSID, Security
Mode, Passphrase/Shared Key, and Port #. Once "Save" is pressed, the network list screen is displayed and the top of
the screen will confirm your connection status by displaying "Connected to XXXX" or "Connecting to XXXX," where
XXXX is the network name.
NOTES:
• If "Connecting to XXXX," continues to be displayed, the Wi-Fi has not been connected and the credentials need to be
verified.
• WPS is not a supported feature.
5: Important Operation Information
This page collects the user's data. Enter the data or skip this page to continue to the Tuxedo's home page. The page
data entries are as follows:
Name
Zip Code
NOTES:
• This page can be accessed from the home page by pressing Setup > System Setup > User Profile.
• The data for Region and Zip Code/Postal Code synchronizes to the Time/Date setup page if completed during the
initial setup. The e-mail address synchronizes to the e-mail setup page, if completed during the initial setup.
• The Zip Code option is needed for accessing sunset/sunrise for your Z-Wave scenes and the weather feature.
6: Remote Login
Up to five "User Name" and "Passwords" can be programmed for Local and Remote access using a smart device or
computer. The check box stating, "Authentication for Web Server Local Access" will prevent a user the ability to login
locally without a user name and password. Failure to enable this option leaves the local access open for anyone with a
smart device or computer (and are connected to the same network). The "Secured Web Server Access (HTTPS)" option
requires the user to enter HTTPS:// before the remote IP address. These fields are optional and pressing Finish
navigates to the screen to the voice disclaimer.
7: Voice Disclaimer
Pressing Accept navigates you to the "Voice Tutorial." Pressing
REJECT disables the voice feature and displays the Tuxedo's home
screen.
NOTE: if Reject is selected, you will be reminded in 2 hours to review again.
TUXEDO TOUCH WI-FI INSTALLATION & SETUP GUIDE
.
Mobile Number
Region
Tuxedo Name
Voice Input Commands are
U L
supplementary only and not evaluated for
UL applications.
10
>
E-mail ID
Advertisement
Table of Contents
