Table of Contents
Advertisement
5. Fully insert the lens into the lens mount opening without turning, until it reaches the stop
position.
6. Connect the lens zoom motor to the two zoom motor harness connectors.
7. Lock the lens assembly in place by rotating the lens clamp downward.
Projector power modes
The CP4415-RGB and CP4420-RGB Gen2 projectors track laser operation hours for the laser optical
subsystem (LOS).
The projector operates with the following power modes:
CP4415-RGB and CP4420-RGB Gen2 Installation and Setup Guide
020-103773-01 Rev. 1 (02-2023)
Copyright
©
2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Installing and setting up
28
Advertisement
Table of Contents
