Projector Power Modes - Christie CineLife+ CP4415-RGB Installation And Setup Manual

Projector power modes

The CineLife+ 4K-RGB projectors track laser operation hours for the laser optical subsystem (LOS).
The projector operates with the following power modes:
Mode
Projector on
Light source on
Standby
IMB powered in Standby
CineLife+ 4K-RGB Installation and Setup Guide–CP4415-RGB, CP4420-RGB, CP4425-RGB, CP4435-RGB
020-103244-06 Rev. 1 (06-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Description
• CineLife+ electronics and light engine are on
• Laser optical subsystem (LOS) is off
• Thermo-electric cooler (TEC) devices for CP4415-RGB and CP4420-RGB are off
• IMB is on
• CineLife+ electronics and light engine are on
• LOS is on
• TEC devices for CP4415-RGB and CP4420-RGB are on
• Fans run at full speed
• IMB is on
• CineLife+ electronics remain on standby with the light engine off
• Fans and LOS are off
• TEC devices for CP4415-RGB and CP4420-RGB are off
• IMB is off—IMB automation does not function
• Turns on the IMB
• Increases the air flow inside the projector to cool the card cage electronics
Installing and setting up
34