1. Close the shutter on the projector to avoid accidental exposure to the projection beam when
working in close proximity to the projection lens.
2. Unlock the horizontal and vertical lock screws (locks A, B, and C).
If applicable for your model, unlock the vertical lock screw (lock C in the image below) by
opening the cover flap (G in the image below) using the screwdriver.
A
Horizontal lock screw (lock A)
B
Horizontal lock screw (lock B)
C
Vertical lock screw (lock C)
D
Vertical boresight screw
E
Horizontal boresight screw
F
Manual focus knob
G
Cover flap (if applicable for your model)
3. Open the shutter on the projector.
4. In the right toolbar, select Test Patterns
5. Select the RGB-4K-Boresight pattern and display it full screen.
Make sure the Uncorrected Color Box option is selected.
CP4415-RGB and CP4420-RGB Gen2 Installation and Setup Guide
020-103773-01 Rev. 1 (02-2023)
Copyright
©
2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
.
Adjusting the image
71