Table of Contents
Advertisement
Refer to the test pattern for guidance on making the adjustments. The right panel of the test
pattern provides information about the integrator zoom and focus adjustments. The left panel
provides information about the fold mirror adjustments.
4. Open the Service door on the side of the projector.
5. To use the integrator rod optical controls, open the access door for the Zoom and Focus
paddles.
6. Loosen the lock screw for the Zoom and Focus paddles.
CP4415-RGB and CP4420-RGB Gen2 Installation and Setup Guide
020-103773-01 Rev. 1 (02-2023)
Copyright
©
2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Adjusting the image
68
Advertisement
Table of Contents
