Operating The Projector; Projector Power Modes; Turning The Projector On Or Off; Logging On To The Projector - Christie CP4315-RGB User Manual

Operating the projector

Learn how to operate the projector and adjust projector settings.

Projector power modes

The Cinema 4K-RGB projectors track laser operation hours for the laser optical sub-system (LOS).
The projector operates with the following power modes:
Mode
Projector on
Light source on
Standby

Turning the projector on or off

Turn on the projector to display content, or turn off the projector to conserve energy or service the
projector.
To operate the projector, the circuit breakers must be in the ON position. If you are servicing the
projector or removing the protective covers, ensure that the MAIN and UPS circuit breakers are in the off
position.
In the right toolbar, select and hold Power.
If the light source is on when turning off the projector, the light source enters a ten-minute
cool-down period automatically.

Logging on to the projector

Log on to the projector to access projector menus.
1. Select Login.
Cinema 4K-RGB User Guide–CP4315-RGB, CP4320-RGB, CP4325-RGB, CP4330-RGB
020-102712-06 Rev. 1 (03-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
Description
• CineLife+ electronics and light engine are on
• Laser optical sub-system (LOS) and thermo-electric cooler (TEC) devices are off
• IMB is on
• CineLife+ electronics and light engine are on
• LOS and TEC devices are on
• Fans run at full speed
• IMB is on
• CineLife+ electronics remain on standby with the light engine off
• Fans, LOS, and TEC devices are off
• IMB is off (IMB automation does not function)
21