Nortel ICS 7.1 Coordinator Manual page 89

Storing a number on a memory button for Autodial / 89
While programming external Autodial, you
erased the button by pressing or
before entering any digits.
Enter the number you want to program.
Choose the line first, if necessary, then enter
the number exactly as if you were making a
call.
Enter the internal telephone number you
want to program.
You are programming an internal autodial
button and have entered a number that is not
an internal number on your system.
Enter a valid internal number.
If the number you are entering is a
destination code, use external autodial.
Press the memory button you want to
program.
Enter the number you want to program onto
the button, then press .
Enter the number you want to program onto
the button, then press or . You may
include a line or line pool selection in an
autodial sequence by selecting the line
before entering any digits.
The number is stored on the button.
Common feature displays
For other displays, see on page 249.
N0130946 01 Modular ICS 7.1 System Coordinator Guide