Table of Contents
Advertisement
5. Press
Using the alarm
To set an alarm on a digital telephone:
1. Press
2. Do one of the following:
If the alarm is correct, press
If you need to change the alarm time, press
displays:
3. To enter a new time, do one of the following:
If the clock uses a 24-hour format, enter an hour between
00 and 23, and minutes between 00 and 59. The set
displays:
If the clock uses a 12-hour format, enter the time, then
when the set displays:
The set displays:
To set an alarm on an analog set:
1. Press
2. Enter a four-digit alarm time:
If the clock uses a 24-hour format, enter an hour between
00 and 23, and minutes between 00 and 59. A tone sounds.
If the clock uses a 12-hour format, enter the time, then
press
To enter a new time, repeat the above steps and enter a new
time. This overwrites the existing entry.
N0130946 01
to exit.
The displays shows
. Press
to select am or
Programming the alarm feature / 189
.The set displays:
to exit.
, press
.
. A tone sounds.
to select pm. A tone sounds.
Modular ICS 7.1 System Coordinator Guide
. The set
or
.
Advertisement
Table of Contents
