Table of Contents
Advertisement
228 / Using Host System dialing signals
6. Press
7. Press
8. Press
.
9. Press
Tip -
exchange (PBX), program Link onto a memory button for one-
touch access.
Pause
The Pause feature enters a 1.5-second delay in a dialing
sequence on an external line. This is often required for
signaling remote devices, such as answering machines, or
when reaching through to PBX features or host systems.
You can program more than one pause in an external autodial
or speed dial sequence.
The Pause symbol ( ) uses one of the 24 spaces in a dialing
sequence.
For pulse dialing,
dialing sequence.
Modular ICS 7.1 System Coordinator Guide
three times. The display reads
.
twice.
three times. The display reads
to choose (Yes) or
If your Norstar system is connected to a private branch
inserts a 1.5-second pause into the
(No).
N0130946 01
Advertisement
Table of Contents
