Table of Contents
Advertisement
156 / Moving line buttons
The 7316 starts lines at button 01, which is the fourth
button down, on the left side of the lower button set.
The 7316E starts line numbering at button 09, which is the
left top corner of the lower button set. Refer to the default
charts for specific button placement for the telephones.
Moving line buttons
You can move external lines, hunt group appearances, and
target line appearances to different buttons on your telephone,
to arrange your lines in the way that makes the most sense to
you. If you have an eCAP, you cannot move intercom or
Answer DN assignments onto the module, but you can move
your lines and Hunt group appearances over to the modules. If
you have a 7316E+eKIM eCAP, you can move lines, target
line appearances, and hunt group appearances over to the
KIM.
Note: The 7000 and 7100 digital phones and Digital Mobility
phones do not have buttons with indicators, therefore this
feature is not valid for those telephones.
1. Press
2. Press the button you want to move the line from.
3. Press the button you want to move the line to.
Displays
Modular ICS 7.1 System Coordinator Guide
.
The two buttons you selected have
exchanged position.
You have tried to move a line to a button that
cannot be used as a line button, such as an
intercom button, handsfree/mute button, or
an answer button.
N0130946 01
Advertisement
Table of Contents
