Table of Contents
Advertisement
50 / Expanding telephone capacity
Designating features or autodial numbers to the eKIM buttons,
can be programmed using the
found under
1. Place the programming overlay over the appropriate
buttons on your two-line-display telephone.
2. Press
3. Press
password).
4. Press
5. Enter the DN number of the 7316E which is attached to the
eKIM you want to program, then press
6. Press
7. Press
8. Press
9. Press
10. Press the
program buttons.
11. Press
program.
12. Press
enter a feature code and feature programming. To make the
button blank, press
Modular ICS 7.1 System Coordinator Guide
(the default System Coordinator
.
.
two times until the display shows
.
.
displays (7316E+<n>KIM).
.
softkey for the KIM for which you want to
TIP -
If no KIM softkeys appear, it means the telephone
was not configured as a CAP under CAP/KIM assign in
System prgrming.
until you find the button you want to
to enter an autodial number, or press
.
, which is
under
.
displays.
displays.
.
displays.
displays.
.
to
N0130946 01
Advertisement
Table of Contents
