Nortel ICS 7.1 Coordinator Manual page 254

254 / Glossary
Autobumping:
A feature that determines what the
system does with new Call Log items
when your Call Log is full. When
Autobumping is on, a new log entry
causes the oldest entry to be deleted. If
Autobumping is off, your Norstar
system does not log calls when your log
is full.
autodial button: A memory button
that, if programmed, provides one-touch
dialing of external or internal numbers.
autolog options:
A feature that allows you to select the
type of calls that are stored in your Call
Log. You can choose to log calls that
were not answered by anyone within the
system, to log calls that were
unanswered at this telephone but which
were answered elsewhere in the system,
to log all calls answered and not
answered at this telephone, or to not
have calls automatically logged.
Automatic Dial: A feature that allows
you to dial without having to pick up the
receiver or select a line. You must have
a prime line to use Automatic Dial.
Automatic Dial is assigned under
in
programming.
Automatic handsfree: A feature
which automatically activates handsfree
operation when you make or answer a
call. Automatic handsfree is assigned
under handsfree in
programming.
Automatic Hold: A feature that
automatically places an active call on
hold when you select another
line.Automatic Hold (
is assigned in programming.
Automatic Privacy: See Privacy.
Modular ICS 7.1 System Coordinator Guide
Automatic Daylight Savings
Time: A feature that switches the
system to standard or extended daylight
savings time at pre-programmed dates.
It is programmed under AutoDS time in
System programming, Feature Settings.
Automatic Telephone
Relocation: A feature that allows a
telephone to retain personal and system
programming when the telephone is
plugged into a different Norstar modular
jack.
relocation in
auxiliary ringer: A separate external
telephone ringer or bell which can be
programmed to ring when a line or a
telephone rings. An auxiliary ringer may
be programmed to ring only when the
system is in a particular schedule.
Programming of an auxiliary ringer is
done in
the feature has been enabled under
programming.
B
Base station: A portable handset
component that is mounted on walls and
ceilings to provide a radio link to an
office or other area where portable
telephones are used. Each base station
houses two radios that allow portables to
send and receive calls through the ICS.
Background Music: A feature that
allows you to hear music from the
speaker of your Norstar telephone. It is
available only if a music source has
been attached to the ICS and the feature
has been enabled under
)
in
Basic password: A one- to six-digit
password that prevents unauthorized
access to the most commonly-used
telephone settings. The Basic password
can be assigned and changed in
is enabled under Set
.
programming after
in
.
programming.
N0130946 01