Table of Contents
Advertisement
Using the room/set programming
This section describes how the room occupancy and room
condition settings are used.
Setting dialing filters by room state
1. Press
2. Enter the Desk admin password if you are prompted for a
password.
The set displays:
3. Enter the room number and press
The set displays
4. Press the
for the room set.
5. To program other rooms, press the
key and return to step 3.
6. Press
Note: Setting the room state to Vacant cancels any outstanding
alarms.
Setting the room condition
You can use this feature on a room set or administration set to:
•
set the room state to service done (
•
set the room state to Needs service (
•
query the state of the room
N0130946 01
display key and select the required status
to exit.
Room/desk information / 185
:
.
.
or
Modular ICS 7.1 System Coordinator Guide
display
)
)
Advertisement
Table of Contents
