Table of Contents
Advertisement
Changing a regular call to handsfree
1. Press the handsfree button.
Note: The 7316E digital phone has a handsfree button located
below the dialpad. This button only works if the
telephone is wired to a system running version 6.1 or
newer software and Handsfree is set to Auto in
programming.
2. Hang up the receiver.
Changing a handsfree to a regular call
Lift the receiver.
Using handsfree
On models with separate handsfree and mute buttons:
•
The indicator next to the handsfree button is solid when
you handsfree is active and off when the telephone is set to
handset or headset.
•
The indicator next to the mute button blinks when you
mute the microphone and turns off when the microphone
is open.
Note: Legacy telephones have only one button for both
functions. In this case, when the telephone is on
handsfree and the microphone is on, the light is solid. If
the telephone is on handsfree and the microphone is off
(mute), the light flashes.
Wait for your caller to finish speaking before you speak. The
microphone and speaker cannot both be on at once. The voice
of your caller may be cut off if you both speak at the same
N0130946 01
Using handsfree and mute / 69
Modular ICS 7.1 System Coordinator Guide
Advertisement
Table of Contents
