214 / Turning Services on and off
Viewing the active Services on a two-line display
When a Service is active, the control telephone display reads
1. Press
the schedule that is in use.
2. If there are several active Services, press
all.
3. Press
Viewing the active Services on a one-line display
1. Press
Service.
2. Press
3. Press
Modular ICS 7.1 System Coordinator Guide
Do not confuse activating Normal service with
canceling a Service.
Setting a Service to Normal is not the same as
canceling a Service using a feature code. If you set
the Service to Normal, the normal version of a
Service overrides any automatic schedule and
remains in effect until you manually cancel it. If you
cancel the Service, you return to the automatic
schedule.
.
. The display shows the first active Service and
to exit the feature.
. The display shows the first active
to move through the active schedule.
to exit.
to see them
N0130946 01