Nortel ICS 7.1 Coordinator Manual page 34

34 /
This is the name the display shows if you don't change it.
Decide what name you want to give to the line.
The name can be up to seven characters long, including spaces.
You can press
twice to return to the Lines heading.
Modular ICS 7.1 System Coordinator Guide
Enter the three-digit number of the line you want
to name. In this example, the line is 002.
Press .
Press .
Press the dialpad button that has the first letter of
the name, until the display shows the letter you
want.
Press .
Use the dialpad and
name.
Press to use the name you entered.
Press to end your session.
once to continue programming this line, or press
until you have the entire
N0130946 01