Nortel ICS 7.1 Coordinator Manual page 252

252 / Common feature displays
Modular ICS 7.1 System Coordinator Guide
You have tried to make, receive or pick up
a call when no line button was available.
Some features require you to have a
button free. Releasing calls can free up line
buttons.
The feature you tried to use requires you to
be on an active call at your telephone. This
display appears when information about a
call has been cleared by a system reset.
All the lines or line pools available to the
telephone are in use. This display appears
when you have tried to dial an external
number or use a feature that conflicts with
the lines, line pools or prime line used by
the telephone. This must be corrected by
your customer service representative or
installer.
The telephone has been set up to dial an
external number on a prime line but the
telephone does not have a prime line. This
must be corrected by your customer
service representative or installer.
You have tried to program redirection while
someone else is programming redirection.
Only one person can program line
redirection at a time.
The line you are trying to use for redirecting
calls is for incoming calls only. Choose an
outgoing line.
Continue entering digits. Press
or to delete incorrect digits. Press
or when you are finished.
You have entered an invalid line pool code
or an invalid destination code.
You have selected a line that is private to
another telephone.
The destination you have chosen for line
redirection is restricted.
N0130946 01