Nortel ICS 7.1 Coordinator Manual page 49

• KIM multi-module cold start
If you want to cold start all the
KIMs attached to your
telephone, simultaneously
press the top two buttons on the
upper button set, and the
bottom two buttons on the
lower button set, as shown in
the following diagram.
Customizing your eKIM
You can move external lines, target lines or hunt group
appearances onto the eKIM by using
Moving line buttons on page 156.
Any of the buttons on the eKIM that do not have line
assignments can be programmed to dial internal or external
numbers automatically. You also still can program features
directly onto eKIM and OKIM buttons. Refer to Time savers
for making calls on page 87 and Customizing your telephone
on page 145 for information about programming memory
buttons.
eKIM button programming for CAP
Any lines and target lines assigned to the 7316E, which
overflow to the eKIM, must be assigned by your installer. You
can, however, use the Coordinator password to assign the
telephone to the hunt groups for which you want to provide an
appearance. Refer to Programming Hunt Groups on page 165
for information about programming hunt group appearances.
N0130946 01
Expanding telephone capacity / 49
Modular ICS 7.1 System Coordinator Guide
. See