Changing Your Call Log Password; Deleting An Assigned Password - Nortel ICS 7.1 Coordinator Manual

142 / Using Call Log
To enter Call Log using your password:
1. Press
programmed a password, the display reads
2. Enter your four-digit password.
If you forget your Call Log password, it can be deleted in
programming. See Using passwords on page 217.

Changing your Call Log password

Use this procedure when you want to change the Call Log
password for your telephone.
1. Press
2. Enter your old password.
The display reads
3. Enter your new four-digit password.
The display reads
4. Re-enter your password.
The display reads
that your password has been changed.

Deleting an assigned password

Use this procedure when you want to delete an assigned
password.
1. Press
2. Enter your old password.
3. The display reads
4. Press
The display reads
that your password has been deleted.
Modular ICS 7.1 System Coordinator Guide
to enter Call Log. If you have
. The display reads
. The display reads
or
.
.
, which confirms
.
, which confirms
.
.
.
N0130946 01