Changing The Automatic Call Forward Settings; Changing Forward No Answer; Changing The Delay Before A Call Is Forwarded - Nortel ICS 7.1 Coordinator Manual

Changing the automatic Call Forward settings

Call forwarding occurs automatically when a call is not
answered or the line is busy. These automatic options are
changed in programming.
For step-by-step instructions, see Change where a call goes
when there is no answer on page 35.

Changing Forward no answer

Forward no answer redirects unanswered calls to another
telephone on your Norstar system.
Tip -
no answer feature is overridden and the Hunt Group call
continues to ring until the hunt time has expired. For more
information about Hunt Groups, see Programming Hunt
Groups on page 165.
Line Redirection takes precedence over Forward no answer.
For instructions for changing Forward no answer refer to
Change where a call goes when there is no answer on page 35.

Changing the delay before a call is forwarded

You can assign the number of times that the incoming call
rings at your telephone before the call is forwarded. To
estimate the delay time in seconds, multiply the number of
rings by six.
For step-by-step instructions, see Change the number of times
the telephone rings before it is forwarded on page 36.
N0130946 01
Forwarding your calls within the system / 113
If the set is a member of a Hunt Group, the Call Forward
Modular ICS 7.1 System Coordinator Guide