Changing Passwords - Nortel ICS 7.1 Coordinator Manual

218 / Using passwords
You can enter the Basic password after the following feature
codes:
•
•
date
Because the Basic password can be used to change the time,
you should give it out with care and change it when necessary,
for example, when an employee leaves the company. If
restrictions, routing or other services operate on a schedule,
changing the time can allow someone to bypass the
programming.

Changing passwords

You can change your password in system programming.
1. Place the programming template over the appropriate
buttons of the programming telephone.
2. Press
3. Press
password).
4. Press
5. Press
6. Press
7. Press
8. Press
you want to change.
9. Use
password. Press
Modular ICS 7.1 System Coordinator Guide
to access User Preferences
to change the system time and
(the default System Coordinator
four times.
.
until you see
. : displays.
until you see the name of the password
, and the dialpad to enter the new
to accept the new password.
.
displays.
displays.
.
N0130946 01