Table of Contents
Advertisement
Park timeout: The time before an
unanswered parked call is routed back to
the telephone that parked it.
is configured under
in
Password: A password is a specific
sequence of digits that you enter to gain
access to Norstar programming, to
override dialing restrictions, or to use
remote access with DISA.
Passwords: A programming section
that allows you to assign or change COS
passwords, Call log passwords, or any
of the programming passwords. Under
programming, you can only
modify the passwords for your level of
programming.
Pause:
A feature that enters a 1.5-second delay
in a dialing sequence on an external line.
This is often required for signaling
remote devices, such as answering
machines, or when reaching through to
PBX features or host systems. The
(
Pause symbol
) uses one of the 24
spaces in a dialing sequence. For pulse
dialing,
inserts a 1.5 second pause
into the dialing sequence.
PBX: private branch exchange.
Pickup Group:
A telephone can be placed into one of
nine call pickup groups. A call ringing at
a telephone within a pickup group can
be picked up at any other telephone
within the same pickup group. A
telephone is assigned to a pickup group
under
programming.
Pool: See Line pool.
portable telephone: See Digital
Mobility phones. portable telephone
N0130946 01
.
in
Pre-dial: A feature that allows you to
enter a number and check it on your
telephone display before it is actually
dialed. If the number is incorrect, you
can edit it. The number is dialed only
when you pick up the receiver or select
a line.
Primary Rate Interface (PRI): An
ISDN interface which uses
23 B channels and a D channel (23B+D)
for profiles 1, 3 and 4, and D channel
(30B+D) for Profile2.
Prime line: The line on your
telephone that is automatically selected
when you lift the receiver, press the
handsfree/mute button or use an
external dialing feature.
A
is assigned to a telephone
under
access in
programming.
Prime Set (prime telephone): A
telephone that provides backup
answering for incoming calls on
external lines. The prime telephone for a
line will ring for any unanswered calls
on that line. A prime telephone is
assigned to a line under
data in
programming.
Priority Call:
If you get a busy signal when you call
someone in your office, you can
interrupt them for an urgent call. This
feature is enabled for a telephone under
in
programming.
Privacy: This feature determines
whether a Norstar user may select a line
in use at another telephone and join an
established call.
under
data in
programming, but can be turned on and
off by users during individual calls.
Private line: See Private to.
Modular ICS 7.1 System Coordinator Guide
Glossary / 263
is enabled
Advertisement
Table of Contents
