Using special telephones
Direct-dial
You can reach the direct-dial telephone by dialing a single
digit. The direct-dial telephone is usually in a central location,
such as at the desk of an administrative assistant or attendant.
You can have up to five direct-dial telephones for your Norstar
system. It is usually the prime telephone or the central
answering position (CAP).
The direct-dial telephone can send up to 30 messages and can
invoke Services to activate the extra-dial telephone.
You cannot forward calls to a direct-dial telephone that is
outside your Norstar system. See Making changes to Call
Forward No Answer on page 35.
Note: ISDN terminals cannot use the Direct-Dial digit to
reach a Direct-Dial set.
Changing the direct-dial telephone assignments
Your installer or customer service representative sets up the
direct-dial telephone.
You can change which direct-dial telephone a telephone is
assigned to, or assign it no direct-dial telephone.
1. Place the programming template over the appropriate
buttons of the programming telephone.
2. Press
3. Press
password).
4. Press
N0130946 01
Using special telephones / 221
(the default System Coordinator
at
Modular ICS 7.1 System Coordinator Guide
.
.