Table of Contents
Advertisement
134 / Using Voice Call
Using Voice Call
Use this feature to make an announcement or begin a
conversation through the speaker of another telephone in the
system.
Tip -
have no appearances for voice calls, and the telephone does
not ring for voice calls. For more information about Hunt
Groups, see Programming Hunt Groups on page 165. For
more information about Answer buttons, see Answer DNs and
Answer keys on page 60.
Muting Voice Call tones
When a voice call begins at your telephone, you hear a beep
every 15 seconds as a reminder that the microphone is on. To
stop it from beeping, pick up the receiver or press the mute
button.
Answering a Voice Call with handsfree
If handsfree answerback is assigned to your telephone, you can
respond to a voice call without touching the telephone.
Handsfree answerback is not available to the 7000 and 7100
digital phones, analog telephones, or the Digital Mobility
phones. On these telephones, all voice calls are received as
ringing calls.
When someone makes a voice call to you, simply start talking.
Your telephone microphone picks up your voice.
Once you have answered a voice call, you can put it on hold,
transfer it, or otherwise treat it as a normal call.
Modular ICS 7.1 System Coordinator Guide
Hunt Groups cannot accept voice calls. Answer buttons
N0130946 01
Advertisement
Table of Contents
