8.15 Tray 2 Pick-Up Assembly - Xerox Phaser 4600 Service Manual

PL 8.15 Tray 2 Pick-up Assembly
Item Part Description
1 – Baseplate (P/O PL 8.15 Item 21)
2 – Holder (P/O PL 8.15 Item 21)
3 – Housing (P/O PL 8.15 Item 21)
4 120N00541 No paper sensor actuator
5 – Duplex feed sensor actuator (P/O
PL 8.15 Item 21)
6 – Drive gear (P/O PL 8.15 Item 21)
7 – Paper guide (P/O PL 8.15 Item 21)
8 – Shaft (P/O PL 8.15 Item 21)
9 – Static eliminator (P/O PL 8.15 Item
21)
10 022N02232 Feed roller (See NOTE 1)
11 – Idle forward roller (P/O PL 8.15
Item 21)
12 – One way gear (P/O PL 8.15 Item
21)
13 – Feed idle gear (P/O PL 8.15 Item
21)
14 – Feed joint gear (P/O PL 8.15 Item
21)
15 – Spring (P/O PL 8.15 Item 21)
16 – Bearing (P/O PL 8.15 Item 21)
17 – Bearing (P/O PL 8.15 Item 21)
18 – Tray up limit switch (P/O PL 8.15
Item 21)
19 130N01628 Duplex feed sensor (Q08-700)/
Stack Height sensor (Q07-250)/ No
paper sensor (Q07-210)
20 – Not Used
21 001N00527 Feed assembly
NOTE: 1. Order 3 of the 022N02232, since it is recommended to
replace all the 3 Feed Rollers (Separator Roller, Nudger Roller,
and Pick Roller) at the same time.
Revised
Phaser 4600/4620/4622 Printer Service Manual
04/2016
5-19
5 Parts List
PL 8.15