8.10 Tray 1 Feeder Assembly - Xerox Phaser 4600 Service Manual

PL 8.10 Tray 1 Feeder Assembly
Item Part Description
1 – Bottom frame (P/O PL 8.10 Item
14)
2 – Top frame (P/O PL 8.10 Item 14)
3 022N02480 Pick assembly; (See NOTE 1) (REP 7.3)
4 022N02479 Seperator roller (See NOTE 1) (REP
7.5)
5 – Envelope guide (P/O PL 8.10 Item
14)
6 – Release guide (P/O PL 8.10 Item
14)
7 – Top ground (P/O PL 8.10 Item 14)
8 – Ground (P/O PL 8.10 Item 14)
9 – Release ground (P/O PL 8.10 Item
14)
10 130N01628 No paper sensor (Q07-110) (REP
7.15)
11 – Feed clutch (CL08-810) (P/O PL
8.10 Item 14) (REP 7.16)
12 – Bearing (P/O PL 8.10 Item 14)
13 – Actuator arm (P/O PL 8.10 Item 14)
14 See note 2 below Tray 1 feeder assembly (REP 7.0)
NOTE: 1. Item 3, Pick assembly, contains the Pick and Feed
Rolls. It is recommended to replace the Separation Roller
assembly (item 4) at the same time.
NOTE 2: Since there are 2 styles of Registration Frame and MP
Assemblies, be sure you order the correct part for your machine's
configuration. Refer to the figure below.
5 Parts List
PL 8.10
04/2016
5-18
Revised
Phaser 4600/4620/4622 Printer Service Manual