Rep 8.32 Feed Sensor Actuator - Xerox Phaser 4600 Service Manual

Figure 2 Remove the actuator cap
11. Release the actuator and spring from the tabs in the frame to remove the actuator.
Figure 3 Remove the Registration Sensor Actuator
4 Repairs and Adjustments
REP 8.31, REP 8.32

REP 8.32 Feed Sensor Actuator

Parts List on PL 8.50 Item 26
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Cover the Drum Cartridge to prevent light exposure.
1. Remove Tray 2,
2. Remove the Toner Cartridge.
3. Remove the Drum Cartridge.
4. Remove the Duplex Unit, REP
5. Remove the IP Board Cover,
6. Remove the Right Cover, REP
7. Remove the Registration Clutch,
8. Remove the Registration Roller Assembly,
9. Remove 2 screws (plastic) that secure the envelope guide to the frame,
04/2016
4-66
WARNING
CAUTION
10.1.
REP 28.1.
28.2.
REP 4.3.
REP 8.27.
Phaser 4600/4620/4622 Printer Service Manual
Figure 1.
Revised