REP 10.11 Fuser Thermistor Assembly
Parts List on
PL 10.15 Item 3
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Do not touch the Fuser while it is hot.
1.
Remove the Rear Door,
REP
28.6.
2.
Remove the Fuser,
REP
10.10.
3.
Remove 3 screws (2 metal) and (1 plastic) that secure the Fuser top cover,
Figure 1 Remove the Fuser top cover
4.
Release 4 hooks and disconnect P/J66 to remove the Thermistor from the Fuser,
2.
Revised
Phaser 4600/4620/4622 Printer Service Manual
WARNING
WARNING
Figure
1.
Figure
04/2016
4-99
Figure 2 Remove the Thermistor
4 Repairs and Adjustments
REP 10.11