Figure 2 Remove the IP Board Cage
Revised
Phaser 4600/4620/4622 Printer Service Manual
REP 3.6 IP Board
Parts List on
PL 3.10 Item 2
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
NOTE: After removal of the MCU Board from the cage, move the Configuration Card, Configu-
ration Card holder and if installed, optional memory and Hard Drive to the new board.
1.
Remove Tray 2.
2.
Remove the Duplex Unit,
REP
3.
Remove the IP Board Cover,
4.
Disconnect 5 connections (CN8, CN10, CN12, CN13, and CN14) to the IP Board and
feed the harnesses out the holes provided,
04/2016
4-17
WARNING
10.1.
REP
28.1.
Figure
1.
4 Repairs and Adjustments
REP 3.5, REP 3.6