Rep 8.50 Hcf No Paper Sensor; Rep 8.51 Hcf Stack Height Sensor - Xerox Phaser 4600 Service Manual

REP 8.50 HCF No Paper Sensor

Parts List on PL 8.25 Item 2
Removal
Use safe handling procedures when removing the module. Refer to
is heavy.
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Remove any installed finishing options from the IOT,
2. Separate the HCF feeder from the printer,
3. Remove the HCF rear cover, REP
4. Remove the HCF right cover, REP
5. Remove the HCF left cover, REP 7.40.
6. Remove the HCF top plate, REP 7.49.
7. Remove the HCF Feed Assembly,
8. Disconnect P/J94 and release 2 hooks that secure the sensor to the HCF Feed Assembly,
Figure 1.
Figure 1 Remove the HCF No Paper Sensor
4 Repairs and Adjustments
REP 8.50, REP 8.51
WARNING
GP 15. The module
WARNING
GP 14.
GP 15.
7.38.
7.39.
REP 8.47.

REP 8.51 HCF Stack Height Sensor

Parts List on PL 8.25 Item 2
Removal
Use safe handling procedures when removing the module. Refer to
is heavy.
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Remove any installed finishing options from the IOT,
2. Separate the HCF feeder from the printer,
3. Remove the HCF rear cover,
4. Remove the HCF right cover,
5. Remove the HCF left cover,
6. Remove the HCF top plate,
7. Remove the HCF Feed Assembly,
8. Disconnect P/J91 and release 2 hooks that secure the sensor to the HCF Feed Assembly,
Figure 1.
Figure 1 Remove the HCF Stack Height Sensor
04/2016
4-78
WARNING
WARNING
GP 14.
GP 15.
REP 7.38.
REP 7.39.
REP 7.40.
REP 7.49.
REP 8.47.
Phaser 4600/4620/4622 Printer Service Manual
GP 15. The module
Revised