Xerox Phaser 4600 Service Manual page 39

03-800-00 Hard Disk Drive Failure RAP
03-800-00 A Hard Disk Drive access failure detected.
BSD-Reference:
WD 9
Initial Actions
• Cycle system power.
• Reseat Hard Drive connection to the IP board.
Procedure
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Cycle system power. The error message is displayed.
Y N
Complete.
Replace the Hard Drive using the instructions provided. The error message is displayed.
Y N
Complete.
Replace the IP Board, REP 3.6.
Revised
Phaser 4600/4620/4622 Printer Service Manual
WARNING
03-970-00 Software Lock Up RAP
03-970-00 A problem has been detected with software running on the MCU Board.
Initial Actions
• Cycle system power.
• Reseat MCU Board connections.
Procedure
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Cycle system power. The error message is displayed.
Y N
Complete.
28.2) and reseat all connections to the MCU Board. The error
Remove the Right Cover (REP
message is displayed.
Y N
Complete.
Replace the MCU Board, REP 3.4.
04/2016
2-15
WARNING
2 Status Indicator RAPS
03-800-00, 03-970-00