Digital Zoom; System Menu - Fluke Ti300U User Manual

For fully-radiometric video and time-lapse mode, the method is similar to the one above. For details
on how to use the Primary Trigger, see

Digital Zoom

Use the Imager's Digital Zoom function to zoom in/out the live or saved thermal image being viewed.
In the area of an image on the screen:
•
Zoom In: Tap the screen with two fingers and spread them outward.
•
Zoom Out: Tap the screen with two fingers and pinch them together.
•
Use two fingers, when the wheel appears at the bottom of the screen, you can slide the wheel to
zoom in/out.
In Live Image mode, a zoom factor shows at the bottom of the screen, as shown in
F3
to hide the scroll wheel and display only the zoom factor. If the factor is 1.0 the zoom factor
does not show.

System Menu

Use the System Menu to change and view settings.
On the Home screen, tap
description of each menu icon in the Figure.
When using the System Menu, if
not respond, check the on-screen display settings and close Hide (
on-screen display settings, see
Table 3.
Figure 7. Zoom In/Out Images
F2
or push , the Main System Menu will show.
Note
does not show on the screen, or
Shortcut Menus.
Thermal Imagers
System Menu
Figure 7. Push
Table 8 lists a brief
F2
does
). For the
15