Removing The Convection Motor - Fisher & Paykel DCS RGS Series Service Manual

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical
shock.
1. Turn off the gas and disconnect power to the range.
2. Remove the main oven door (see page 78 for the door
removal procedure).
3. Remove the racks from the oven.
4. Remove the four screws from the convection cover.
Convection Cover (4 Screws)
SERVICING THE COMPONENTS

REMOVING THE CONVECTION MOTOR

5. Remove the four machine screws from the convection
motor assembly plate and lay the assembly in the bot-
tom of the oven cavity.
Convection Motor Assembly (4 Screws)
6. Remove the two ceramic nuts off the convection motor
wires and untwist the wires.
7. Remove the convection motor assembly from the
range.
Convection Motor Wires
48