Removing The Oven Door - Fisher & Paykel OR24SDMBGX User Manual

Hide thumbs Also See for OR24SDMBGX:
Table of Contents

Advertisement

Available languages

Available languages

Fig. 5.10
REMOVING
THE OVEN DOOR
The oven door can easily be removed as follows:
Open the door to the full extent (fig. 5.10a).
Open the lever "A" completely on the left and right hinges (fig. 5.10b).
Hold the door as shown in fig. 5.10.
Gently close the door (fig. 5.10c) until left and right hinge levers "A" are hooked
to part "B" of the door (fig. 5.10b)
Withdraw the hinge hooks from their location following arrow "C" (fig. 5.10d).
Rest the door on a soft surface.
REFITTING
THE OVEN DOOR
Hold the door firmly (fig. 5.10).
Insert the hinge tongues into the slots, making sure that the groove drops into
place as shown in the fig. 5.11a.
Open the door to its full extent.
Fully close the levers "A" on the left and right hinges, as shown in the figure fig.
5.11b.
Close the door and check that it is properly in place.
Fig. 5.10a
A
Fig. 5.10b
C
Fig. 5.10d
Fig. 5.11a
Fig. 5.11b
A
21

Advertisement

Table of Contents
loading

Table of Contents