Removing The Grill Burner & Ignitor - Fisher & Paykel DCS RGS Series Service Manual

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical
shock.
1. Turn off the gas and disconnect power to the range.
2. Remove the two grates from the top of the grill.
Grill Grates
SERVICING THE COMPONENTS
REMOVING THE GRILL BURNER & IGNITOR
3. Lift the front of the radiant tray and remove it from over
the grill.
4. To remove the burner from the grill:
a) Remove the screw from the rear burner brack-
et.
b) Lift the rear of the burner and pull the air shutter
off the orifi ce on the single thermal valve.
28
Radiant Tray
Grill Burner Rear Screw
Orifi ce Air Shutter