Fisher & Paykel DCS RGS Series Service Manual page 28

REMOVING THE COOKTOP – 30" & 36" MODELS
9. Remove the four torx screws from the left and right
sides (two on each side) of the valve panel.
4 Valve Panel Screws
10. Rotate the valve panel onto the protected drip pan (if
present), or on the oven door handle so you can access
the components.
11. Remove the four front screws from the cooktop.
Left
Cooktop
Screws
SERVICING THE COMPONENTS
Right
Cooktop
Screws
12. Lift the front of the cooktop, and remove it from the
range.
Lift Cooktop Front
27